Sismojoint

Sismojoint

Extractible AKYLUX formwork panel for earthquake-resistant expansion joint

  • Its extraction enables a perfectly regular earthquake-resistant expansion jointfree of any impurities
  • Up to 6 uses
  • Holes for the cones
  • Resists bad weather
  • Resists the concrete’s pressure
  • Easy extraction
  • Every SISMOJOINT is delivered with 6 LDPE slip-off covers to minimise the friction for optimal extraction

More details

 
More info

Extractible AKYLUX formwork panel for earthquake-resistant expansion joint.


The reusable SISMOJOINT panel consists of a superposition of 10 and/or 13.3 mm AKYLUX boards inserted in a LDPE cover. Unlike cardboard products, the SISMOJOINT does not degrade when exposed to damp.
This cover protects the boards and makes them easier to extract. The cover has to be replaced every time it is used. The SISMOJOINT is delivered with 6 covers.
Extra covers can be supplied on request.
The SISMOJOINT is pre-drilled and delivered with bored strut cones necessary for the second phase concrete wall within the limit of the thickness of 25 cm (seal + 2nd phase wall). Beyond this limit, strut tubes with washers have to be used.


Its extraction enables a perfectly regular earthquake-resistant expansion
jointfree of any impurities (cardboard, concrete, laitance…) to be made
Up to 6 uses
Holes for the cones
Resists bad weather
Resists the concrete’s pressure
The natural flexibility of polypropylene makes extracting the SISMOJOINT easier
Every SISMOJOINT panel is delivered with 6 LDPE slip-off covers to
minimise the friction for optimal extraction


Standard dimensions :


HUSSOR or SATECO wallform
Thickness : 20 mm
Width : 1,20 m
Height : 3 m


HUSSOR or SATECO wallform
Thickness : 40 mm
Width : 1,20 m
Height : 3 m


HUSSOR or SATECO wallform
Thickness : 60 mm
Width : 1,20 m
Height : 3 m


OUTINORD wallform
Thickness : 20 mm
Width : 1,25 m
Height : 3 m


OUTINORD wallform
Thickness : 40 mm
Width : 1,25 m
Height : 3 m


OUTINORD wallform
Thickness : 60 mm
Width : 1,25 m
Height : 3 m

Maximum dimensions 1,25 m x 4,5 m (consult us for the special dimensions).

Range :

The SISMOJOINT is available in thicknesses of 20, 30, 40, 50, 60, 70, 80, 100, and 120 mm. These various thicknesses are obtained by assembling 10 and 13.3 mmAKYLUX boards.

Extraction :
The SISMOJOINT panels have to be extracted with a special extraction tool. Every panelis equipped with 6 straps in the upper part. The extraction tool has as many anchoring points as there are straps on the panels.
The SISMOJOINT panels are stripped with a force of between normally 500 and 2,000Kg, depending on their dimensions and the configuration of the site.


The SISMOJOINT panels have to be adapted to the type of formwork :


For HUSSOR and SATECO wallforms: width 1.20 m and ½ width 0.60 m
For OUTINORD wallforms: width 1.25 m and ½ width 0.625 m
Thestandard heightis 3.00 m for concrete walls of up to 2.80 m. The extra height of 20 cm is necessary for the zone to let the straps through.
The SISMOJOINT can also be supplied for the heights of 3.50 m and 4.00 m or for an intermediateheight.


Standard articles codification:


SISM20/120X300
SISM20/125X300
SISM20/60X300
SISM20/62.5X300


SISM40/120X300
SISM40/125X300
SISM40/60X300
SISM40/62.5X300


SISM60/120X300
SISM60/125X300
SISM60/60X300
SISM60/62.5X300


EXTRACTEURSISMO


Consultations


Every consultation must include:

⇒ Number of panels
⇒ Expansion JointThickness
⇒ Thicknessof 2ndphase concrete wall
⇒ Panel width
⇒ Height concrete/height panel
⇒ Centre-to-centre vertical distance of the form ties

Implementation and extraction

 
SISMOJOINT ACCESSORIES

SISMOJOINT ACCESSORIES

 
Videos

Montage REZABOITE P et G

Créez simplement et rapidement vos boites d'incorporation de gaines sanitaire/chauffage en dalle. Nos REZABOITE sont prêtes à l'emploi en moins de 20 secondes. La preuve en images !